Skip to content
Rock auger on an excavator, silhouetted against the sky
Kamstra

Rock drilling and boring contractors · Geelong, VictoriaThrough rock.
Through steel.

Bored piers and foundations anywhere in Australia, from basements to communications towers. Now with 12 kW fibre laser cutting from our Moriac workshop.

01 · Rock drilling

Did we mention we do rock?

Core barrels or rock augers, over 40 metres deep. We carry the gear for every size, plus spare drills, so the job gets done on time. Hit water or sand and we case the hole in steel before the concrete goes in.

Every drill we run, to scale

Diameter in millimetres

450
500
600
750
900
1000
1050
1200
1500
1650
2200
Topsoil
Clay and sand
Weathered rock
Hard rock
Illustration only. Ground varies site to site.
Basements ·Foundations ·Retaining walls ·Communications towers ·Stabilisation works ·Laser cut plate ·
12 kW fibre laser cutting steel plate

02 · Laser cutting

The workshop that keeps our rigs running now cuts plate for you

A 12 kW G.Weike fibre laser with a 3000 × 1500 mm bed. Send a DXF, we check it, quote it and cut it.

12 kW fibre 3000 × 1500 mm Mild steel plate Up to 32 mm plate
Laser cutting details
Kamstra prime mover with an excavator on the float

We float our own gear

Our own semi-trailer and tag float, so we can get to any job. Our work takes us all over the country, all year round.

When we're not drilling, you'll find us at the speedway.

Kamstra Motorsports #S37 →

Drilling questions

Rock drilling, answered

What drill sizes do you have?

We drill from 450 mm up to 2200 mm diameter: 450, 500, 600, 750, 900, 1000, 1050, 1200, 1500, 1650 and 2200 mm. We carry core barrels and rock augers for each size, plus spares so the job keeps moving.

How deep can you bore?

Over 40 metres, through soil and hard rock.

What if we hit water or sand?

We install steel casings to stop the hole collapsing before the concrete goes in.

What sort of jobs do you do?

Bored piers and foundations, basements, retaining walls, communications towers and stabilisation works.

Where do you work?

We're based in Moriac near Geelong and work all over Australia. We float our own rigs on our own semi-trailer and tag float, so we can get to any job.

About Kamstra

An honest approach that puts quality first. That's been the job since 2000.

Kamstra is owner-operated and built from the ground up. Experience and extra care are the keys to safety, and we keep a firm focus on safe work, for your benefit and ours. Weekends, you'll find us at the speedway with our sprintcar, #S37.

Willy Kamstra, owner

Let's get it done

0414 731 817

willy@kamstra.com.au · Moriac, Victoria

We only use your details to reply to you. Privacy policy

Get a drilling quoteCall